Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

晚第四纪冲绳海槽北段CaCO3含量的时空变化及其控制因素     

李军  李凤业  周永青  齐金成  厉玉乐 《海洋地质与第四纪地质》2004,24(2):15-22

对取自冲绳海槽北段的6个沉积岩心进行了CaCO3含量、粒度和铀系同位素分析，结合氧同位素数据和海槽其他钻孔的相应结果，探讨了冲绳海槽北部晚第四纪以来CaCO3含量的垂向与横向变化特征。结果表明，冲绳海槽北段沉积总体上表现为全新世CaCO3含量高、晚更新世CaCO3含量低的“大西洋型”碳酸盐演化特征，但冲绳海槽北段和中部的碳酸盐演化特征并不一致，海槽内西坡、槽底和东坡的不同部位其演化特征也存在较大差异。碳酸盐含量的变化与沉积物粒度特征密切相关，晚第四纪冲绳海槽碳酸盐演化的时空差异是多种因素相互作用的结果。  相似文献   

不同软基处理方法适用性比较   总被引：8，自引：0，他引：8  

熊丛博  于定勇 《海岸工程》2003,22(1):20-26

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。  相似文献   

面向GIS的线状符号开放式多元设计方案   总被引：4，自引：0，他引：4  

吴自银 《海洋通报》2003,22(1):70-76

提出一种跨越专业限制，用于快速绘制任意曲率曲线的开放式线状符号“组合配置法”设计方案，即用主干线、辅助线、辅助圆和点符号等四种子线型的有机组合描述目标线型，并详细论述了其数据结构、文件结构及子线型的实现方法。同时还提出伪码法用于解决满足国标要求的图廓整饰线，并对裁剪法作了简要阐述。上述线型设计方法已成功设计、实现并应用于“海底地形成图系统(MBChar)”，已服务于大陆架海底成图项目。  相似文献   

几丁糖酯原料药稳定性研究     

吕志华  赵峡  徐家敏 《中国海洋大学学报(自然科学版)》2001,31(6):842-848

该文建立高效凝胶渗透色谱法 (HPGPC) ,明胶比浊法 ,氧瓶燃烧法三种分析方法考察海洋硫酸多糖药物几丁糖酯的稳定性 ,采用这三种方法分别考察几丁糖酯原料药在高温、高湿、强光照射及加速条件下分子量及分布宽度、样品中硫酸根含量及样品含量的变化情况。结果表明 :三种方法均适用于几丁糖酯的稳定性考察 ,几丁糖酯在上述影响因素条件下稳定性良好  相似文献   

东营城区高精度三维地震采集方法研究   总被引：3，自引：0，他引：3  

胡立新  刘怀山  张进 《中国海洋大学学报(自然科学版)》2004,34(6):1075-1080

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。  相似文献   

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method     

赵明  滕斌 《中国海洋工程》2004,18(2):267-280

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.  相似文献   

南海罗斯贝变形半径的地理及季节变化   总被引：3，自引：1，他引：3  

甘子钧  蔡树群 《热带海洋学报》2001,20(1):1-9

根据南海 1°× 1°网格的标准层季节平均温、盐度资料 ,在未引入Boussinesq近似条件下 ,采用改进的Thompson Haskell算法求解线性化斜压海洋水平大尺度波的垂直结构方程 (重力内波方程 ) ,从而得到了南海各网格点的第一斜压重力波相速度和相应的罗斯贝变形半径 ,并探讨其地理分布和季节变化特征 ,以期有助于南海环流和中尺度涡旋以及有关海洋侧边界效应的研究。  相似文献   

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification     

Woojae Seong  Cheolsoo Park 《Marine Georesources & Geotechnology》2001,19(1):37-50

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

Triple diagram method for the prediction of wave height and period   总被引：1，自引：0，他引：1  

Mehmet zger  Zekai en 《Ocean Engineering》2007,34(7):1060-1068

Many formulations have been developed so far to predict the wave height and period from fetch length and wind blowing duration for a constant wind speed. This study aimed to predict wave parameters from fetch length and meteorological factors by using triple diagram methodology based on Kriging principles. Proposed model results were compared with Joint North Sea Wave Project (JONSWAP) model which is used so commonly in the ocean and coastal engineering studies. For the implementation of the methodology hourly wave and wind data were obtained from a buoy located in Lake Ontario. Numerical and graphical comparisons demonstrated that the proposed method outperforms the classical formulation.  相似文献